The two-sided Car Wash Mitt has nubby chenille microfibre on one side and sponge layer microfibre on the other to collect dirt and debris. It washes out easily with just a quick rinse, and the handy loop facilitates quick drying.
Using harmful chemicals to get your car clean isn’t good for you or the environment. In addition, you (or a car wash facility) could risk scratching your car if the wrong tools are used. Regular cotton cloths and towels aren’t a good option because they can’t pick up as much dirt, which means you may have to use several of them— and lots of water—to do the job well.
Solution:
The Car Wash Mitt gets your car clean and streak-free without scratching, using just one bucket of water. The thick chenille microfibre gently lifts dirt and grime up high and away from your car’s surface. And no harmful chemicals are washed into storm drains, which means a healthier environment for us all.
It’s best to hose the vehicle down from top to bottom to remove larger particles of dirt and grime. However, you can also wash your car with a single bucket of water
Wet the Car Wash Mitt and wring it out well. Then use the mitt to wash a quarter of the exterior of the vehicle at a time, working your way from top to bottom. Rinse the mitt as needed
Finish by drying each section of the vehicle as you go with the Car Cloth. Don’t forget the wheel rims!
When using on easily scratched surfaces such as brushed stainless steel, first test Norwex Microfibre on an inconspicuous spot.
During the manufacturing splitting process, the microfibre is split into very thin strands, each a fraction of the thickness of a human hair. When woven together, these strands now have a much larger surface area covered with millions of spaces between the fibres to trap maximum moisture, dirt and debris.
A standard garden hose produces about 38 litres per minute. This means that a 10-minute car wash can use up to 380 litres of water if you leave your hose running.
You can use Leather Shine on your car’s wheels to make them look almost new!